Clear the Stump So the Yard Is Usable Again

Professional stump grinding services for residential properties in San Angelo, Texas.

You might have a stump left behind after a tree removal that is now sitting in the middle of your lawn or blocking a flowerbed you want to replant. Top to Bottom Tree Trimming & Removal Services grinds stumps throughout San Angelo using equipment that removes the wood below ground level, so the area can be used for grass, landscaping, or future construction without tripping hazards or pest problems.

This service uses a stump grinder with a rotating cutting wheel that chips away the stump and major surface roots. The grinder is positioned over the stump and worked back and forth until the wood is reduced to mulch several inches below the soil line. You receive cleanup of the grindings if requested, or they can be left on site to fill the hole and decompose naturally. Free estimates are available throughout the surrounding San Angelo area, with pricing based on stump diameter and access.

If you need a stump removed so you can mow, plant, or build over the area, reach out to Top to Bottom Tree Trimming & Removal Services for a free estimate in San Angelo.

What Happens to the Stump and Root System

You will see the grinder positioned directly over the stump, and the cutting wheel will be lowered into the wood to begin breaking it apart. In San Angelo, most stumps are ground down six to eight inches below the surface, which is enough to cover with soil and allow grass or plants to grow over the area. The machine moves side to side to clear the stump and any large roots spreading near the surface.

After the grinding is finished, you will have a shallow depression filled with wood chips where the stump used to be. The area will no longer trip anyone walking across the yard, and pests like termites or beetles will not be attracted to the decaying wood. The equipment minimizes impact on surrounding soil and grass, so the rest of your lawn stays intact while the stump is removed.

This service does not remove the entire root system below ground, but those roots will decay naturally over time. If you plan to replant a tree in the same spot, the grindings should be removed and fresh soil added to give the new tree a better start.

Homeowners often want to know how deep the grinder goes and what will be left behind once the work is done, so here are answers to the most common questions about stump grinding in San Angelo.

Common Questions About Stump Grinding

How deep does the grinder go into the ground?
Most stumps are ground six to eight inches below the surface, which is deep enough to cover with soil and plant grass or flowers. Deeper grinding is possible if needed for construction or paving.
What happens to the wood chips?
You can choose to have the chips hauled off or left on site. If left behind, they can be used as mulch or mixed with soil to fill the hole where the stump was.
Why is stump grinding better than digging it out?
Grinding is faster, less disruptive, and does not require tearing up your yard with heavy machinery. It leaves the surrounding grass and landscaping mostly undisturbed.
When should a stump be ground after tree removal?
You can grind a stump right after the tree is removed or wait until later. Waiting does not affect the grinding process, but leaving the stump in place longer increases the chance of pests moving in.
What size stumps can be ground?
Most residential stumps can be handled with standard grinding equipment. Very large stumps or those in tight spaces may require additional setup time, which will be discussed during the estimate.

If you have a stump that is making your yard harder to mow or plant around, Top to Bottom Tree Trimming & Removal Services can grind it down and leave the area ready for whatever comes next. Contact us to schedule a free estimate in San Angelo.